Siemens Desigo CC vs Automated Logic WebCTRL Which is Right for Your Project?
Siemens Desigo CC vs Automated Logic WebCTRL Which is Right for Your Project?
Both platforms are fully BACnet open-protocol and deliver comparable HVAC monitoring, energy management, and integration capability. The choice depends on your facility type, the MEP consultant specification, the operating authority requirements, and long-term support considerations. Our engineering team can advise based on your specific project.
| Factor | Siemens Desigo CC | Automated Logic WebCTRL |
| Best for | Large complex facilities, hospitals, airports, campus | Hospitals, hotels, commercial offices, universities |
| Scale | 100 to 100,000+ objects | 500 to 50,000+ I/O points |
| Protocol | BACnet, LON, Modbus, KNX, OPC UA | BACnet native, Modbus, LonWorks, M-Bus |
| Integration depth | Fire, security, access, lifts in one platform | HVAC-focused; fire/access via BACnet gateway |
| Programming | Siemens engineering tool (RACS/TALON) | GPC Builder drag-and-drop graphical |
| Graphic interface | HTML5, web-browser based | HTML5, web-browser, mobile-ready |
| Energy management | ISO 50001 aligned, advanced analytics | ASHRAE 50/50, interval metering, dashboards |
| UAE presence | Very strong large airport and hospital base | Very strong hotel and commercial buildings |
Our BMS Services in UAE Full Project Lifecycle
Team Switchgear provides a complete turnkey BMS service from the initial design stage through to post-handover support under a single project scope. This eliminates the coordination problems that arise when BMS design, panel supply, and commissioning are split between different contractors.
- BMS design and engineering points schedule, network architecture, DDC panel drawings, sequence of operations
- DDC panel fabrication and testing assembled and tested at our Dubai facility
- BMS hardware supply controllers, room sensors, actuators, meters, communication equipment
- Site installation and wiring supervised installation by our trained field engineers
- BACnet device integration third-party chillers, AHUs, drives, meters, fire alarm panels
- Software programming and graphic development fully customised operator interface
- Control loop commissioning PID tuning, set point verification, sequence testing
- ASHRAE 180 / ASHRAE 135 commissioning documentation
- Operator training system handover training for FM and engineering teams
- Post-handover AMC annual maintenance contracts for BMS software, hardware, and calibration
Why Choose Team Switchgear for BMS in UAE?
Authorised partner for both platforms: We are authorised partners for Siemens Building Technologies and Automated Logic Corporation in the UAE meaning we supply genuine, warranted hardware and receive direct technical support from the manufacturers.
In-house DDC panel manufacturing: All DDC control panels are designed, assembled, and tested in our Dubai manufacturing facility not outsourced. Our panel shop produces the same quality standards as our ATEX/Ex and LV switchgear projects.
BACnet expertise: Our BMS engineers hold BACnet International certifications and have designed and commissioned BACnet networks from small 20-device systems to complex multi-building campuses with thousands of objects. We troubleshoot multi-vendor BACnet integration problems that other contractors cannot resolve.
UAE regulatory knowledge: We understand the specific BMS requirements of UAE authorities DEWA energy monitoring conditions for Green Building compliance, Dubai Civil Defence integration requirements, Abu Dhabi DoH hospital environment controls, and Estidama/LEED documentation. We build compliance into the design from the outset.
Single-source accountability: From the DDC panel to the operator graphics to the commissioning certificate one team, one contract, one point of responsibility. No contractor interface disputes, no coordination delays.